Anchor kits contain heavy duty fasteners for securing the walkway mats, entrance mats, and stair mats to wood and concrete surfaces. With a 5/16" diameter masonry bit and drill, you can have the walkway mat secured to the concrete in less than 5 minutes.
Features
Each Anchor Kit contains 4 black screws & 4 anchors.
All Residential HeatTrak Mats have 4 grommet holes.
Warranty and Care
2-year manufacturer's warranty
How It Works
INSTALLING ON CONCRETE OR MASONRY SURFACE:
Place all mats in their final use positions.
For each mat, mark the center of all 4 corner grommets on the surface, then move the mats aside so the anchor holes can be drilled.
Using a 5/16” diameter masonry bit and drill, drill a 2” deep hole at each mark.
Blow the masonry dust our of each hole. A “Duster”-type compressed gas can works well for this.
Place one anchor in each hole and tap until flush or below flush with a hammer.
Replace the mats in position, insert a screw in each anchor, and install with a Phillips screwdriver.
When storing the mats for the off-season, replace the screws in the anchors to keep out debris.
840,000+ Mats Sold
2 Year Warranty
Snow Mats Made in N. America